Search results

Fewer researchers have investigated the climatic and economic drivers of land-use change simultaneously and the interplay between drivers. This paper aims to investigate the nonlinear and interaction effects of price and climate variables on the rice acreage in high-latitude regions of China.

This study applies a multivariate adaptive regression spline to characterize the effects of price and climate expectations on rice acreage in high-latitude regions of China from 1992 to 2017. Then, yield expectation is added into the model to investigate the mechanism of climate effects on rice area allocation.

The results of importance assessment suggest that rice price, climate and total agricultural area play an important role in rice area allocation, and the importance of temperature is always higher than that of precipitation, especially for minimum temperature. Based on the estimated hinge functions and coefficients, it is found that total agricultural area has strong nonlinear and interaction effects with climate and price as forms of third-order interaction. However, the order of interaction terms reduces to second order after absorbing the expected yield. Additionally, the marginal effects of driven factors are calculated at different quantiles. The total area shows a positive and increasing marginal effect with the increase of total area. But the positive impact of price on the rice area can only be observed when price reached 50% or higher quantiles. Climate variables also show strong nonlinear marginal effects, and most climatic effects would disappear or be weakened once absorbing the expected rice yield. Expected yield is an efficient mechanism to explain the correlation between crop area and climate variables, but the impact of minimum temperature cannot be completely modeled by the yield expectation.

To the best of the authors’ knowledge, this is the first study to examine the nonlinear response of land-use change to climate and economic in high-latitude regions of China using the machine learning method.

Clothing patterns play a dominant role in costume design and have become an important link in the perception of costume art. Conventional clothing patterns design relies on experienced designers. Although the quality of clothing patterns is very high on conventional design, the input time and output amount ratio is relative low for conventional design. In order to break through the bottleneck of conventional clothing patterns design, this paper proposes a novel way based on generative adversarial network (GAN) model for automatic clothing patterns generation, which not only reduces the dependence of experienced designer, but also improve the input-output ratio.

In view of the fact that clothing patterns have high requirements for global artistic perception and local texture details, this paper improves the conventional GAN model from two aspects: a multi-scales discriminators strategy is introduced to deal with the local texture details; and the self-attention mechanism is introduced to improve the global artistic perception. Therefore, the improved GAN called multi-scales self-attention improved generative adversarial network (MS-SA-GAN) model, which is used for high resolution clothing patterns generation.

To verify the feasibility and effectiveness of the proposed MS-SA-GAN model, a crawler is designed to acquire standard clothing patterns dataset from Baidu pictures, and a comparative experiment is conducted on our designed clothing patterns dataset. In experiments, we have adjusted different parameters of the proposed MS-SA-GAN model, and compared the global artistic perception and local texture details of the generated clothing patterns.

Experimental results have shown that the clothing patterns generated by the proposed MS-SA-GAN model are superior to the conventional algorithms in some local texture detail indexes. In addition, a group of clothing design professionals is invited to evaluate the global artistic perception through a valence-arousal scale. The scale results have shown that the proposed MS-SA-GAN model achieves a better global art perception.

The purpose of this study is to evaluate the effect of graphene, basalt flakes and their synergy on the corrosion resistance of zinc-rich coatings. As the important heavy-duty anticorrosion coatings, zinc-rich coatings provided cathodic protection for the substrate. However, to ensure cathodic protection, a large number of zinc powder made the penetration resistance known as the weakness of zinc-rich coatings. Therefore, graphene and basalt flakes were introduced into zinc-rich coatings to coordinate its cathodic protection and shielding performance.

Three kinds of coatings were prepared; they were graphene modified zinc-rich coatings, basalt flakes modified zinc-rich coatings and graphene-basalt flakes modified zinc-rich coatings. The anticorrosion behavior of painted steel was studied by using the electrochemical impedance spectroscopy (EIS) technique in chloride solutions. The equivalent circuit methods were used for EIS analysis to obtain the electrode process structure of the coated steel system. Simultaneously, the corrosion resistance of the three coatings was evaluated by water resistance test, salt water resistance test and salt spray test.

The study found that the addition of a small amount of graphene and basalt flakes significantly improved the anticorrosion performance of coatings by enhancing their shielding ability against corrosive media and increasing the resistance of the electrochemical reaction. The modified coatings exhibited higher water resistance, salt water resistance and salt spray resistance. The graphene-basalt flakes modified zinc-rich coatings demonstrated the best anticorrosion effect. The presence of basalt scales and graphene oxide in the coatings significantly reduced the water content and slowed down the water penetration rate in the coatings, thus prolonging the coating life and improving anticorrosion effects. The modification of zinc-rich coatings with graphene and basalt flakes improved the utilization rate of zinc powder and the shielding property of coatings against corrosive media, thus strengthening the protective effect on steel structures and prolonging the service life of anticorrosion coatings.

The significance of developing graphene-basalt flakes modified zinc-rich coatings lies in their potential to offer superior performance in corrosive environments, leading to prolonged service life of metallic structures, reduced maintenance costs and a safer working environment. Furthermore, such coatings can be used in various industrial applications, including bridges, pipelines and offshore structures, among others.

Drawing upon psychological ownership theory, the aim of this study was to uncover the coexisting mediating effects of knowledge sharing and hiding on the relationship between employees’ organizational psychological ownership (OPO) and their innovative work behavior (IWB). The moderating role of organizational context in these mediating relationships was further examined to determine the moderated mediation paths.

This study mainly used a survey-based research method and collected data from 512 professionals from both public and private organizations in Pakistan to test our proposed hypotheses.

The results showed that coexisting knowledge sharing and hiding mediated the relationship between employees’ OPO and IWB. Furthermore, organizational context moderated the mediated relationships, providing support for the moderated mediation framework.

The results highlight the significance of fostering employees’ OPO to enhance their IWB by promoting knowledge sharing and preventing knowledge hiding. This study also urges managers to consider the contingency effect of organizational contexts when promoting employees’ IWB in emerging economies.

The results obtained in this study suggest that the knowledge behavior paradox occurs in organizations, and distinct organizational contexts play crucial but differential roles in intervening in the effect of employees’ OPO on their IWB. This study empirically validated this complex mechanism in an important emerging economy in Asia.

Prior literature indicates conflicting effects of online product information, which may complicate or simplify consumer purchase decisions. Therefore, the purpose of this paper is to investigate how different online product information (i.e. the choice set size and the popularity information and its presentation) affect consumers’ decision making and the related market outcomes.

This research relies on information-processing theories and social learning theory. By stepwise conducting two 2×2 within-subject factorial design experiments, this research examines the effects of the choice set size, product popularity information and product presentation on consumers’ decision making and the aggregated market outcomes.

The results show that product popularity information led consumers to either simplify or complicate their decision strategy, depending on the size of the choice sets. Additionally, presenting products by their popularity in descending order resulted in consumers making decisions with a larger decision bias. The results also show that the presence of product popularity was more likely to forge a “superstar” structure in a large market.

The research suggests that e-retailers and e-marketplace operators should carefully utilize product popularity information. Multiple mechanisms that shape different shopping environments with different orders are necessary to create a long-tailed market structure.

This study found the mixed effects of product popularity information when it is presented in different environments (i.e. the large/small choice set and the sorted/randomized product presentation). The overuse of popularity information may induce consumers’ decision bias.

In the high-altitude, high-voltage electromagnetic interference operation environment, due to the parameters perturbation for robot control model caused by uncertainties and disturbances, and with the poor effective of the conventional proportional–integral–derivative (PID) control to parameters perturbation system, the mathematical model of power cable live operation robot joint PID closed-loop control system is established.

The corresponding joint motion robust PID control method is also proposed based on Kharitonov theory, the system robust stability conditions including the sufficient and necessary conditions are deduced and obtained and the solving process of robust PID control parameters stability region is provided.

Finally, the simulation research on robot joint motion PID control system is also launched in MATLAB environment based on Kharitonov theory. The results show that the conventional PID control obtains better control effect only to nominal model but is ineffective to parameter perturbation system, while robust PID obtains sound control effect to parameter perturbation system. Compared with H8 robust PID, the Kharitonov robust PID has better control effect which meet the system design requirements of joint motor quickly response, high tracking accuracy and sound stability. Finally, the validity and engineering practicability are verified by 220-kV living replacing damper operation experiment.

This paper has described the development of a damper replacement power cable live maintenance robot experimental prototype, which greatly improves operation efficiency and deals with the safety problem of operation in a high-voltage environment. A general manipulator motion control model of the power cable robot is established; the Kharitonov theory-based parameter perturbation robust motion control method of damper replacement robot is also obtained. Through the simulation comparison, it is verified that the Kharitonov control has more superiority for dealing with the parameter perturbation systems under the premise of ensuring the stability motion. The field experiment has further confirmed the engineering practicability.

In the extreme power environment of flexible transmission line, wind load, high voltage and strong electromagnetic interference, the motion performance of the robot manipulator is strongly affected by the extreme environment. Therefore, this study aims to improve the manipulator motion control performance of power cable maintenance robot and effectively reduce the influence of specific operation environment on the robot manipulator motion posture.

The mathematical model under three typical operation conditions, namely, flexible line, wind load and strong electromagnetic field have been established, correspondingly the mapping relationship between different environment parameters and robot operation conditions are also given. Based on the nonlinear approximation feature of neural network, a back propagation (BP) neural network is adopted to solve the posture control problems. The power cable line sag, robot tile angle caused by wind load and spatial field strength are the input signals of the BP network in the robot motion posture control method.

Through the training and learning of the BP network, the output control variables are used to compensate the actual robot operation posture. The simulation experiment verifies the effectiveness of the proposed algorithm, and compared with the conventional proportional integral differential (PID) control, the method has high real-time performance and sound stability. Finally, field operation experiments further validate the engineering feasibility of the control method, and at the same time, the proposed control method has the remarkable characteristics of sound universality, adaptability and easy expansion.

A multi-layer control architecture which is suitable for smart grid platform maintenance is proposed and a robot system platform for network operation and maintenance management is constructed. The human–machine–environment coordination and integration mode and intelligent power system management platform can be realized which greatly improves the intelligence of power system management. Mathematical models of the robot under three typical operation conditions of flexible wire wind load and strong electromagnetic field are established and the mapping relationship between different environmental parameters and the robot operation conditions is given. Through the non-linear approximation characteristics of BP network, the control variables of the robot joints can be obtained and the influence of extreme environment on the robot posture can be compensated. The simulation results of MATLAB show that the control algorithm can effectively restrain the influence of uncertain factors such as flexible environment, wind load and strong electromagnetic field on the robot posture. It satisfied the design requirements of fast response, high tracking accuracy and good stability of the control system. Field operation tests further verify the engineering practicability of the algorithm.

The purpose of this paper is to improve the operation and maintenance intelligence of power systems, and summarize the transmission line robots and their key technologies. High-voltage power cables are important channels for power transmission systems. Their special geographical environment and harsh natural environment can lead to many different faults. At present, such special operations in dangerous and harsh environments are performed manually, which have not only high labor intensity and low work efficiency but also great personal safety risks.

For maintenance works that are far away from the tower, power outages are required. With the increasing evaluation of transmission quality and operational safety, and the urgent need for automation and operation of modern power systems, the contradiction between this manual operation and modern high-quality power transmission has become increasingly prominent. An effective method to replace the manual maintenance work is to use the mobile robot to carry the operation manipulator and its end tool, that is, the live maintenance robot.

Some achievements have been made in the key technologies of live maintenance robots, the work to be done to meet the basic requirements of complex and changeable line environment and practical application. Based on the existing research results of live overhaul robot, the follow-up research will focus on the practical application needs and the frontier of scientific and technological development, and truly realize the human–machine integration between live overhaul robot–human working environment. Only in this way can the robot better serve the operation and maintenance of the power system.

This paper reviews the system platform, operation function, structural characteristics and key technologies involved in the power cable robot, and the combination of live maintenance robots and modern high-tech such as big data and cloud computing is also given, and finally, the future development direction of the special operation robot is pointed out.

In response to the poor reliability of live maintenance robots in semi-structured environments and the difficulty of monitoring their operation status, this paper aims to propose an online method for evaluating the operation status of high-voltage live maintenance robots based on fuzzy control.

The robot bolt tightening operation is taken as an example. During the whole operation process, the key technologies of bolt tightening are analyzed theoretically, a two-dimensional fuzzy control model of bolt tightening process control is established and the control parameters, which characterize the operation status, are obtained. Through dynamic adjustment of the fuzzy controller, real-time online monitoring of the robot operation status can be achieved.

The results of simulation experiments and 220 kV live operation experiments show that the reliability of robot bolt tightening is greatly enhanced by the proposed control method.

The results not only verify the engineering practicability of the fuzzy control-based method but also indicate that it can improve efficiency, safety and operability.

Drawing on open systems theory, this study aims to investigate the direct and moderating effects of information collaboration in the pre-sale stage, transaction management collaboration in the transaction stage and customer service collaboration in the post-sale stage on the linkages of the online–offline store image and the market performance of small sellers.

Data were collected from multiple sources, including self-reported and online objective data from 148 small restaurants that simultaneously sell online and offline, for validating the developed research model. Partial least squares-based structural equation modeling was used for data analysis.

This study illustrates the direct effects of an online store’s image and online–offline collaborations on the market performance of small stores. This study further reveals the boom-bust moderating effects of different collaborations between online–offline images and market performance.

Small stores should be aware of the importance of information congruence and functional integration concerning online–offline collaboration. They should also recognize the paradoxical intervening effects of online–offline collaboration on different channels and arrange appropriate collaboration tactics.

This study presents a significant contribution to the open systems theory by revealing both constructive and destructive properties of the online–offline collaborative system with offline-to-online targeting. Vertically differentiated online–offline collaboration may strengthen one side of the store image but weaken the other side for promoting the market performance of small stores.